Boom Barrier Gate
Boom Barrier gate is durable, accurate, flexible and safe. It assembles with aluminum alloy octagonal boom with the Max. Length of 6m, with the open/close time from 1.2s, 3s, and 6 seconds.
Designed with balance mechanism, which makes boom start slowly, run quickly and stop slowly.
Intelligent over-heat protection system for driving mechanism, to control motor’s temperature and avoid damaging during frequent usage.
Control Board in a Plastic box makes control board waterproof and dustproof.
Manual control in case of no power.
Boom barrier gate
Again, Boom barrier gate is not just functional, but also aesthetic, FENTRY’ add-on value for our clients.
smart barrier gate with easy operations;
Tool-less and quick service from rear;
Fast and accurate assembly;
boom barrier gate with WIDE RANGE INTEGRATION
Features of Boom Barrier Gate
To protect the vehicle not to be hit by boom arm: While boom arm moving down a vehicle comes, if an open command is given by the push button or remoter transmitter, the arm will immediately stop closing, and start opening immediately.
Anti-condensation in cold climate:
Antifreeze ensures the lubricant will not be frozen so that the boom barrier gate will keep working in frozen environment. No need to add more antifreeze within the lifetime of barrier.
Overheat protection on motor:
Once the working temperature is more than 80 degree, the motor will stop working. However, before that the barrier will finish current. As long as the temperature return normal, the motor will recovery.
Control Board in a Plastic box:
Putting then control board into a plastic box makes control board waterproof and dustproof, also protects operator.
|Framework Material||Cold-roll sheet, IP54 level||Cold-roll sheet, IP54 level||Cold-roll sheet, IP54 level|
|Beam||Aluminum alloy||Aluminum alloy||Aluminum alloy|
|Dimension||340 * 230 * 970mm||340 * 280 * 1120mm||331 * 286 * 936mm|
|Net Weight||50kg||50kg||55kg / 65kg|
|Input Interface||Photo cell, loop detector, parking system||Photo cell, loop detector, parking system||Photo cell, loop detector, parking system|
|Input||12V relay signal or Pulse Wide>100MS||12V relay signal or Pulse Wide>100MS||12V relay signal or Pulse Wide>100MS|
|Power Supply||AC220V/110V, 50/60Hz||AC220V/110V, 50/60Hz||AC220V/110V, 50/60Hz|
|Motor Consumption||70W||70W||80W / 150W|
|Working Temperature||-40°C to 85°C||-40°C to 85°C||-40°C to 85°C|
|MCBF||3 million time||3 million time||5 million time|
|Remote Control||Two button remote transmitter, Distance≤50m||Two button remote transmitter, Distance≤50m||Two button remote transmitter, Distance≤50m|
|Optional Accessories||Loop detector; IR photo cell||Loop detector; IR photo cell||Loop detector; IR photo cell|
|Beam Type||Straight | Articulated 90 degree | Articulated 180 degree | Fence | Telescopic||Straight | Articulated 90 degree | Articulated 180 degree | Fence | Telescopic||Straight | Articulated 90 degree | Articulated 180 degree | Fence | Telescopic|
|Max Beam Length||6M||6M||6M|
|Opening/Close Time||3S – 6S||3S – 6S||1S – 6S|
Your Content Goes Here